Exploring Mobile and Embedded Computer Solutions

i.MX6 System On Module | EMB-1200

EMB-1200

NXP i.MX6 Ultra Small Form Factor Modular ARM Cortex-A7 Embedded Board with 3D Expansion

Key Features

  • NXP i.MX 6 DL or Quad Cortex-A9 ARM processor
  • Open modular design with 3D expansion
  • Small footprint and low profile to fit in 2-gang electrical box
  • 200-pin top and bottom headers to bring out Flexible I/O
  • SOM like single board computer
  • Fully support Yocto embedded Linux and Qt

EMB-1200

The EMB-1200 is an ultra-small form factor embedded board based on Freescale i.MX6 Cortex A9 ARM platform. It has either Freescale i.MX6DL or i.MX6Q processor with onboard DDR3 memory and iNAND flash storage. The I/O interfaces include HDMI, USB2.0, micro SD slot, serial console, OTG, and 200 pin headers on the top and bottom to bring out all the display ports, camera ports, CAN, serial, I2C, SPI, SDIO and more i.MX6 I/O resources.

Specifications

Model EMB-1200
Platform Freescale i.MX6
Form Factor HIoTX
Processor Freescale i.MX6DL (default)
or i.MX6Q at 1GHz
System Memory 64-bit 1GB DDR3 SDRAM 400MHz(i.MX6DL)
or 528MHz(i.MX6Q)
Ethernet Onboard Gigabit Ethernet PHY
Storage 4GB iNand Flash,up to 32GB
Graphic Controller Vivante GC 880 + Vivante GC 320 (i.MX6DL)
Vivante GC 2000 + Vivante GC 355 + Vivante GC 320 (i.MX6Q)
Display Interface 1x mini HDMI
Display Resolution HDMI – 1920 x 1080
SD Card Socket 1 x micro SD Socket
(does not support hot plug)
USB 2 x 4-pin 2.0 mm pitch
USB 2.0 pin headers
Boot Switch 1 x 2-bit DIP switch for iNAND and
micro SD boot selection
Power Switch 1 x on-board power switch
Console Port 1 x 4-pin TTL serial port
Power Input 1 x 5V/2A DC power input, 2.5mm OD, 0.7mm ID
OTG 1 x OTG device only
Expansion 4x 50 pin with size of 1.27mm  pitch top and bottom for I/O expansion.  
These 200-pin top and bottom female headers offers 24 bit Parallel Display Port,
dual channel 24 bit LVDS, MIPI DSI up to 24 bit, MIPI CSI for up to 4 lanes,
8 bit parallel  camera interface, GbE PHY, x1 PCIe PHY, 2x USB2.0,
I2S audio codec output with Line-out/detect, Line-out, Mic-in/detect, speaker out (1W),
4 bit SDIO, and IOMUX outputs: up to 5x UART, 2x CAN,
3x SPI, 3x I2C, 34 configurable GPIO
Operating Temperature -10 ~ 50° C (14 ~ 122° F), 
50° C – 75° C option available
Storage Temperature -40 °C to 80 °C (-40°F-176°F)
Operating Humidity 5% to 95% Relative Humidity Non-Condensing
Dimensions 85 x 72 mm (3.34″ x 2.84″)

Resources

+ Specifications

Specifications

Model EMB-1200
Platform Freescale i.MX6
Form Factor HIoTX
Processor Freescale i.MX6DL (default)
or i.MX6Q at 1GHz
System Memory 64-bit 1GB DDR3 SDRAM 400MHz(i.MX6DL)
or 528MHz(i.MX6Q)
Ethernet Onboard Gigabit Ethernet PHY
Storage 4GB iNand Flash,up to 32GB
Graphic Controller Vivante GC 880 + Vivante GC 320 (i.MX6DL)
Vivante GC 2000 + Vivante GC 355 + Vivante GC 320 (i.MX6Q)
Display Interface 1x mini HDMI
Display Resolution HDMI – 1920 x 1080
SD Card Socket 1 x micro SD Socket
(does not support hot plug)
USB 2 x 4-pin 2.0 mm pitch
USB 2.0 pin headers
Boot Switch 1 x 2-bit DIP switch for iNAND and
micro SD boot selection
Power Switch 1 x on-board power switch
Console Port 1 x 4-pin TTL serial port
Power Input 1 x 5V/2A DC power input, 2.5mm OD, 0.7mm ID
OTG 1 x OTG device only
Expansion 4x 50 pin with size of 1.27mm  pitch top and bottom for I/O expansion.  
These 200-pin top and bottom female headers offers 24 bit Parallel Display Port,
dual channel 24 bit LVDS, MIPI DSI up to 24 bit, MIPI CSI for up to 4 lanes,
8 bit parallel  camera interface, GbE PHY, x1 PCIe PHY, 2x USB2.0,
I2S audio codec output with Line-out/detect, Line-out, Mic-in/detect, speaker out (1W),
4 bit SDIO, and IOMUX outputs: up to 5x UART, 2x CAN,
3x SPI, 3x I2C, 34 configurable GPIO
Operating Temperature -10 ~ 50° C (14 ~ 122° F), 
50° C – 75° C option available
Storage Temperature -40 °C to 80 °C (-40°F-176°F)
Operating Humidity 5% to 95% Relative Humidity Non-Condensing
Dimensions 85 x 72 mm (3.34″ x 2.84″)
+ Resources

Resources

Open Source Embedded Linux

The EMB-1200 supports Open Source embedded Linux created by the Yocto Project development environment. The Yocto Project is an open-source collaboration project that provides templates, tools, and methods to help you create custom Linux-based systems for embedded products regardless of the hardware architecture.